MapPing
[modifica | modifica wikitesto]MapPing software | |
---|---|
Genere | Utility |
Sviluppatore | Marco Lugo |
Data prima versione | 11/11/2020 |
Ultima versione | 3.0.0.14 (17/05/2022) |
Sistema operativo | Windows 10 |
Licenza | Shareware (licenza non libera) |
Lingua | Inglese |
Sito web | www.tearsinrain.it/owl-software/international/products.php |
MapPing è un programma per Windows 10 che è stato creato l’ 11/11/2020 da Marco Lugo. Il programma, distribuito secondo la modalità sharewareconsente di individuare, lanciata da linea di comando, tutti i dispositivi attivi connessi in una LAN basata su IPv4. Originariamente distribuito sia in versione a 32 bit che a 64 bit dalla versione 3.0.0.11 in poi esiste solo a 64 bit. La scansione effettuata da MapPing fa uso del multithreading e sfrutta le CPU multi core.
Caratteristiche
[modifica | modifica wikitesto]- MapPing nella sua versione demo e utilizzabile indefinitamente ma può scansionare solo l’utlimo ottetto di un IPv4. Altre limitazioni presenti sono l’individuazione di un massimo di tre dispositivi e l’impossibilità, di questa versione, di salvare i risultati della scansione sia in formato CSV che TXT.
- Ovviamente tutti i limiti di sopra non sono presenti nella versione registrata.
- Sia la versione demo, pur con le limitazioni già esposte prima, che quella registrata sono in grado di mostrare utili informazioni sulle schede Ethernet o WIFI attive .
- Entrambe le versioni mostrano per ogni IP individuato l’hostname, il mac address e, se è possibile, il nome del produttore del dispositivo.
- È totalmente portatile e non scrive niente nel registro di Windows e per questo è possibile copiarlo in una pennetta USB per utilizzarlo come tool portatile.
- Le sue dimensioni sono inferiori a 700KB
Localizzazioni.
[modifica | modifica wikitesto]MapPing esiste esclusivamente in lingua inglese.
Help in linea del programma.
[modifica | modifica wikitesto]MapPing is a little but powerful IP address scanner and one of the few,
if not the only one, that works from the command line on Windows.
Example of use to scan the LAN IP from 192.168.0.10 to 192.168.0.40:
MapPing --range=192.168.0.10-40
Parameters:
-a or --attempts that define the total number of Pings and ARP requests that the programme will make
in case of problems. The default value is 1, the maximum is 255 and the minimum is 0.
ex: MapPing --range=192.168.0.30-40 --attempts=5
ex: MapPing --range=192.168.0.30-40 -a=50
-c or --csv that saves, in the same directory of MapPing, the output of the
command in CSV format with the name "MapPing.csv".
ex: MapPing -r=192.168.0.1-20 --csv
-h or --help that displays the help text that you are reading now.
ex: MapPing --help
-li or --listint that show, in a list, all the infos and IPs associated to the active network interfaces of the PC
ex: MapPing -li
-o or --obscure that hides, only on the screen, the privacy sensible parts of MAC and/or IP.
For default the value of this parameter is "none"
ex: MapPing --range=192.168.0.1-10 --obscure=all
ex: MapPing --range=192.168.0.1-10 --obscure=ip
ex: MapPing --range=192.168.0.1-10 --obscure=mac
ex: MapPing --range=192.168.0.1-10 --obscure=none
-r or --range that defines the IP range to scan (for Default is 192.168.0.1-254).
ex: MapPing --range=192.168.0.30-40
-rs or --reset that reinitialize the "MapPing.ini" on the base of the actual PC.
ex: MapPing -rs
ex: MapPing --reset
-s or --saveconfig that saves, in the same directory of MapPing, a config file
named "MapPing.ini" that will be utilized if the command is called without any parameters
ex: MapPing -r=192.168.0.1-20 --csv --saveconfig
-st or --savetxt that saves, in the same directory of MapPing, all the command output as a normal text file
named "MapPing.txt"
ex: MapPing -r=192.168.0.1-20 --st
-t or --timeout that sets the timeout in milliseconds for the ping
(for Default is 100 milliseconds, that is the minimum, the maximum is 65535).
ex: MapPing -r=192.168.0.1-20 --timeout=500
-v or --version that displays the version of MapPing.
ex: MapPing --version
-w or --wait that, at the end of the program, wait for any key pressed from the user.
For default the value of this parameter is "off"
ex: MapPing --wait=off
ex: MapPing -r=192.168.0.1-20 --csv -w=on
Thats all folks!